Page 2 of 4

#51 Re: Using ASICS miners etc on Bitcoin

Posted: Sun Sep 07, 2014 7:27 pm
by scole of TSBT
Program data>boinc>projects>www.boicoinutopia.net_bitcoinutopia what goes in here??? app_config.xml

program data>boinc what goes in here??? cc_config.xml

app_config.xml looks ok as long it doesn't have the extra app_config> in it.

Make your cc_config.xml look like this...

<cc_config>
<options>
<use_all_gpus>1</use_all_gpus>
<coproc>
<type>miner_asic</type>
<count>1</count>
</coproc>
</options>
</cc_config>

It will use all 3 ASICs automatically. You don't need any special config for that. As far as I know you only need coproc count set to 1. Not sure what 3 would do.

#52 Re: Using ASICS miners etc on Bitcoin

Posted: Sun Sep 07, 2014 8:37 pm
by robmacagain
Schole, cheers mucker, it was that 3asic thing that stopped it working, i just changed it to 1 and off it went, pernickety project :lol: , all is good now, Thanks pal :).

#53 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Sep 10, 2014 7:02 pm
by robmacagain
Paul, how many ant's you running?

#54 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Sep 10, 2014 8:47 pm
by Silver
Hi Rob. I've got 3 ants scurrying away.
How are you getting on with yours? I'll need to have a look at the stats and establish the threat level from you!

#55 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Sep 10, 2014 9:15 pm
by robmacagain
Ich haben vier :roll: , so if you have 3 why are you getting more credit per hour on average than me???

#56 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Sep 10, 2014 9:28 pm
by Silver
robmacagain wrote:Ich haben vier :roll: , so if you have 3 why are you getting more credit per hour on average than me???
I'd love to tell you but I haven't a clue.
Have you left a core free for Bitcoin/the ants to use?
I was trying to 'share' a core between bitcoin/ants and my gpu - it looked like it was ok but since I've left one free my numbers seem to have gone up.

#57 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Sep 10, 2014 9:33 pm
by robmacagain
What do you mean, Have i left a core free, on my cpu? my cpu is doing no crunching what so ever, i don't like it crunching.

#58 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Sep 10, 2014 10:20 pm
by Alez
There you go, the cpu is sleeping :D better start flogging it :P

Though seriously, do you have a powered hub ?, does it produce enough power ? Do you have a fan on the ants? are they running too hot ? Bitcoin works only on the internet, is your connection slow compared to silvers ? Are all 3 of your ant's working ? Is one of them throwing hardware errors or has many rejected shares. Check the stderr rpt in the project slot or under tasks on the project page.

Did someone unload dodgy stock on you :lol:

#59 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Sep 10, 2014 10:38 pm
by robmacagain
Well 75% of them are from oor willy!!!

Nope no errors, yep all working no powered hub all plugged in to the pc all flashing little green lights in a random order, am on Virgin 100mb so it isne slow, no fans on them there a bit hot but you can touch them, oh aye the cpu is staying idle n all, cant be sat near it when there crunching as the rad chucks some serious heat out, never seen the cpu temperature go over 51c :) but it still is not crunching.

#60 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Sep 10, 2014 11:38 pm
by Alez
no comment on the source :shock:

Are you both running the same app and campaign ? Could also be down to luck. Me and Scole have very similar capacities at the moment in GH/s but some days have wildly different outputs, though it does seem to average out over a few days when we can both keep our wee farms chugging along.
There doesn't seem to be an obvious reason, give it a couple of days and see where you are averaging out .

#61 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 12:19 am
by scole of TSBT
Rob, copy and paste your cc_config.xml and app_config.xml contents and lets see if we can see anything.

#62 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 12:48 am
by robmacagain
<app_config>
<app>
<name>C-cgminer</name>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<plan_class>asic</plan_class>
<app_name>C-cgminer</app_name>
<cmdline>--anu-freq 250</cmdline>
</app_version>
</app_config>

<cc_config>
<options>
<use_all_gpus>1</use_all_gpus>
<coproc>
<type>miner_asic</type>
<count>1</count>
</coproc>
</options>
</cc_config>

There you are sir, looks ok to me :?:.

#63 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 1:37 am
by scole of TSBT
First, there seem to have been some extra payout reported on the BU forum this week. It's random who got it and they're working to correct it. Paul may have gotten a few more extra. I don't see anything wrong with your config either. Your WU logs show that your miners are crunching over 6 Gh/s. I checked 40 WUs from you and Paul. Your times are less than Pauls, but only by about 10%, not as much as expected. One thing to help for now is getting the oveclocking working. Have you restarted BOINC since getting the app_config.xml set correctly. If not, shut down the client and restart so it will pick up the cmdline with the freq setting. Should give another 1.5 Gh/s per miner or 30% throughput.

Just a reminder there's a Collatz challenge starting tomorrow and your 7990 would sure make a contribution. :thumbright: Here's the forum link...http://www.dunadd.co.uk/seti/forum/view ... 148&t=2387

#64 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 10:46 am
by Alez
If you overclock the ant's make sure they are cooled or they will overheat...... they do get hot enough to burn fingers etc.
All the new water cooling is just begging to be let off the leash and stretch it's legs, collatz hint, hint :D

#65 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 11:28 am
by robmacagain
YEAH yeah, i get it, but it wont be 24/7 for a straight 7 days, but i will do some.

#66 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 11:46 am
by Silver
robmacagain wrote:YEAH yeah, i get it, but it wont be 24/7 for a straight 7 days, but i will do some.
Peer pressure strikes again.
Or maybe that should be pirate pressure :pirate: :D

#67 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 12:37 pm
by Alez
Silver wrote:
robmacagain wrote:YEAH yeah, i get it, but it wont be 24/7 for a straight 7 days, but i will do some.
Peer pressure strikes again.
Or maybe that should be pirate pressure :pirate: :D
Yarrrr Image, I mean nayyyyy, nah Yarrrrr :? :lol:

#68 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 1:24 pm
by scole of TSBT
robmacagain wrote:YEAH yeah, i get it, but it wont be 24/7 for a straight 7 days, but i will do some.
No intent to put pressure on you, honest. Just wanted to make sure you knew about the challenge.

#69 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 3:25 pm
by Alez
scole250 wrote:
robmacagain wrote:YEAH yeah, i get it, but it wont be 24/7 for a straight 7 days, but i will do some.
No intent to put pressure on you, honest. Just wanted to make sure you knew about the challenge.
Liar, liar, pants on fire :D

#70 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 3:55 pm
by scole of TSBT
I may not be shy about dropping a few hints or reminders about a challenge or putting a call out for more crunchers on them, but when a GPU is sucking down over 300 watts of power, there are costs to consider. Last time my wife saw our electric bill, she asked "Why is this going up? Is there something wrong with the AC?". I quickly muttered, "Tell Jack to turn his TV and Xbox off when he leaves his room". There will be no badgering from me about this. We finally lured Rob into running BU. Our time would be better spent urging him to upgrade to an r-box. :lol:

#71 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 11:19 pm
by Silver
scole250 wrote: Your WU logs show that your miners are crunching over 6 Gh/s. I checked 40 WUs from you and Paul. Your times are less than Pauls, but only by about 10%, not as much as expected.
I'm probably missing the obvious here but where are you seeing the Gh/s rate?

#72 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 11:27 pm
by Alez
Go to your account on BU, computers on this account or tasks, valid, then click on a task to see the completed stderr. scroll down to the bottom and you will find a summary of per devices. gives in order device name, 5s and ave GH/s A accepted shares R rejected shares HW hardware errors see below

[2014-09-11 20:14:43] Summary of per device statistics:

[2014-09-11 20:14:43] BAJ0 (5s):7.122G (avg):6.794Gh/s | A:0 R:0 HW:31 WU:87.6/m
[2014-09-11 20:14:43] BXM0 (5s):4.014G (avg):4.865Gh/s | A:1024 R:0 HW:0 WU:68.1/m
[2014-09-11 20:14:43] NF10 (5s):1.966G (avg):1.858Gh/s | A:0 R:0 HW:0 WU:27.2/m
[2014-09-11 20:14:43] LIN0 (5s):35.13G (avg):32.43Gh/s | A:3072 R:1024 HW:5 WU:453.1/m
[2014-09-11 20:14:43] ANU0 (5s):1.591G (avg):1.591Gh/s | A:1024 R:0 HW:2 WU:22.9/m
[2014-09-11 20:14:43] ANU1 (5s):1.598G (avg):1.591Gh/s | A:1024 R:0 HW:7 WU:21.4/m
[2014-09-11 20:14:43] ANU2 (5s):1.596G (avg):1.584Gh/s | A:1024 R:0 HW:2 WU:21.5/m
[2014-09-11 20:14:43] ANU3 (5s):1.597G (avg):1.592Gh/s | A:0 R:0 HW:0 WU:24.3/m
[2014-09-1 [2014-09-11 20:14:43] LIN2 (5s):40.32G (avg):32.86Gh/s | A:8192 R:1024 HW:0 WU:459.3/m
[2014-09-11 20:14:43] Mined 20480 accepted shares of 20480 requested

[2014-09-11 20:14:43]
1 20:14:43] LIN1 (5s):36.48G (avg):32.23Gh/s | A:5120 R:0 HW:0 WU:450.4/m
[2014-09-11 20:14:43] LIN2 (5s):40.32G (avg):32.86Gh/s | A:8192 R:1024 HW:0 WU:459.3/m
[2014-09-11 20:14:43] Mined 20480 accepted shares of 20480 requested

#73 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Sep 11, 2014 11:45 pm
by Silver
Thanks Alez, just having a poke around after Robs questions and Scoles post.
I'm starting to look over my shoulder since a certain team member has acquired some new gear - and maybe need to step up a gear :twisted:

#74 Re: Using ASICS miners etc on Bitcoin

Posted: Sun Sep 14, 2014 2:16 am
by Megacruncher
scole250 wrote:. Last time my wife saw our electric bill, she asked "Why is this going up? Is there something wrong with the AC?". I quickly muttered, "Tell Jack to turn his TV and Xbox off when he leaves his room. :lol:
Never, ever let your wife see the 'lecky bill. Usually you will save some money by switching to online billing, so do it. If despite this she sees it you must blame the Ukrainian civil war, or some other local issue.

#75 Re: Using ASICS miners etc on Bitcoin

Posted: Sun Sep 14, 2014 7:13 am
by Alez
Although both are done online through my account, my wife and I came to an agreement a long time ago. She doesn't ask about the electricity bill, I never mention the phone bill. Simples :lol:

#76 Re: Using ASICS miners etc on Bitcoin

Posted: Mon Oct 06, 2014 10:24 am
by robmacagain
:evil: Grrr bloomin RockMiner R-Box locked up last night at roughly 19:00 only spotted it this morning, lost roughly 25,000,000 :(.

#77 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Oct 15, 2014 7:29 pm
by robmacagain
HELP.

Had to reinstall windows again today (dont ask) and now BU wont use my asics properly, what do i do???

#78 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Oct 15, 2014 7:33 pm
by scole of TSBT
-Download zadig and install USB drivers
-add entries to cc_config.xml...
<coproc>
<type>miner_asic</type>
<count>1</count>
</coproc>
-click your heels 3 times and pray

#79 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Oct 15, 2014 7:39 pm
by robmacagain
done the cc_config and app_config and zadig, entrys to cc_config..........................errrr, where?

<cc_config>
<log_flags>
<file_xfer>1</file_xfer>
<sched_ops>1</sched_ops>
<task>1</task>
<android_debug>0</android_debug>
<app_msg_receive>0</app_msg_receive>
<app_msg_send>0</app_msg_send>
<async_file_debug>0</async_file_debug>
<benchmark_debug>0</benchmark_debug>
<checkpoint_debug>0</checkpoint_debug>
<coproc_debug>0</coproc_debug>
<cpu_sched>0</cpu_sched>
<cpu_sched_debug>0</cpu_sched_debug>
<cpu_sched_status>0</cpu_sched_status>
<dcf_debug>0</dcf_debug>
<disk_usage_debug>0</disk_usage_debug>
<file_xfer_debug>0</file_xfer_debug>
<gui_rpc_debug>0</gui_rpc_debug>
<heartbeat_debug>0</heartbeat_debug>
<http_debug>0</http_debug>
<http_xfer_debug>0</http_xfer_debug>
<mem_usage_debug>0</mem_usage_debug>
<network_status_debug>0</network_status_debug>
<notice_debug>0</notice_debug>
<poll_debug>0</poll_debug>
<priority_debug>0</priority_debug>
<proxy_debug>0</proxy_debug>
<rr_simulation>0</rr_simulation>
<rrsim_detail>0</rrsim_detail>
<sched_op_debug>0</sched_op_debug>
<scrsave_debug>0</scrsave_debug>
<slot_debug>0</slot_debug>
<state_debug>0</state_debug>
<statefile_debug>0</statefile_debug>
<suspend_debug>0</suspend_debug>
<task_debug>0</task_debug>
<time_debug>0</time_debug>
<trickle_debug>0</trickle_debug>
<unparsed_xml>0</unparsed_xml>
<work_fetch_debug>0</work_fetch_debug>
</log_flags>
<options>
<allow_multiple_clients>0</allow_multiple_clients>
<allow_remote_gui_rpc>0</allow_remote_gui_rpc>
<client_version_check_url>http://boinc.berkeley.edu/download.php? ... _check_url>
<client_new_version_text></client_new_version_text>
<client_download_url>http://boinc.berkeley.edu/download.php< ... wnload_url>
<coproc>
<type>miner_asic</type>
<count>1</count>
<peak_flops>0.000000</peak_flops>
<device_nums>0</device_nums>
</coproc>
<disallow_attach>0</disallow_attach>
<dont_check_file_sizes>0</dont_check_file_sizes>
<dont_contact_ref_site>0</dont_contact_ref_site>
<exit_after_finish>0</exit_after_finish>
<exit_before_start>0</exit_before_start>
<exit_when_idle>0</exit_when_idle>
<fetch_minimal_work>0</fetch_minimal_work>
<fetch_on_update>0</fetch_on_update>
<force_auth>default</force_auth>
<http_1_0>0</http_1_0>
<http_transfer_timeout>300</http_transfer_timeout>
<http_transfer_timeout_bps>10</http_transfer_timeout_bps>
<max_event_log_lines>2000</max_event_log_lines>
<max_file_xfers>8</max_file_xfers>
<max_file_xfers_per_project>2</max_file_xfers_per_project>
<max_stderr_file_size>0</max_stderr_file_size>
<max_stdout_file_size>0</max_stdout_file_size>
<max_tasks_reported>0</max_tasks_reported>
<ncpus>-1</ncpus>
<network_test_url>http://www.google.com/</network_test_url>
<no_alt_platform>0</no_alt_platform>
<no_gpus>0</no_gpus>
<no_info_fetch>0</no_info_fetch>
<no_priority_change>0</no_priority_change>
<os_random_only>0</os_random_only>
<proxy_info>
<socks_server_name></socks_server_name>
<socks_server_port>80</socks_server_port>
<http_server_name></http_server_name>
<http_server_port>80</http_server_port>
<socks5_user_name></socks5_user_name>
<socks5_user_passwd></socks5_user_passwd>
<http_user_name></http_user_name>
<http_user_passwd></http_user_passwd>
<no_proxy></no_proxy>
</proxy_info>
<rec_half_life_days>10.000000</rec_half_life_days>
<report_results_immediately>0</report_results_immediately>
<run_apps_manually>0</run_apps_manually>
<save_stats_days>30</save_stats_days>
<skip_cpu_benchmarks>0</skip_cpu_benchmarks>
<simple_gui_only>0</simple_gui_only>
<start_delay>0.000000</start_delay>
<stderr_head>0</stderr_head>
<suppress_net_info>0</suppress_net_info>
<unsigned_apps_ok>0</unsigned_apps_ok>
<use_all_gpus>1</use_all_gpus>
<use_certs>0</use_certs>
<use_certs_only>0</use_certs_only>
<vbox_window>0</vbox_window>
</options>
</cc_config>

#80 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Oct 15, 2014 7:52 pm
by scole of TSBT
Your cc_config entries are already there. Check your computing preferences and make sure it will run while pc in use, try bumping up min work buffer, suspend any other projects to see if that will trigger a WU download.

#81 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Oct 15, 2014 7:54 pm
by robmacagain
I have work but the asics are not doing anything?

Have only put BU back on and copied all cc_ and app_config.

#82 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Oct 15, 2014 8:11 pm
by scole of TSBT
zadig shows the ants and rockminers as CP2102 USB to UART Bridge Controller and uses driver Win USB (v6.1.7600..)?

#83 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Oct 15, 2014 10:55 pm
by robmacagain
I have gave up :(.

The asics are running power light is on and blue light's flashing but their dead slow.

Fed right up!!!

#84 Re: Using ASICS miners etc on Bitcoin

Posted: Wed Oct 15, 2014 11:43 pm
by scole of TSBT
Do you know where to find the stderr.txt file in the slots folder? That gives the log messages about the current WU. Does it show anything pointing to problem?

#85 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 12:22 pm
by robmacagain
:lol: am losing the will to live.

I have started all from the beginning and now i am faced with this message >
Notice from BOINC
Missing start tag in cc_config.xml
16/10/2014 12:15:32 · more...

I have this as app_config

<app_config>
<app>
<name>C-cgminer</name>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<plan_class>asic</plan_class>
<app_name>C-cgminer</app_name>
<cmdline>--anu-freq 250</cmdline>
</app_version>
</app_config>


I only have the ants in at the moment.

And this is my cc_config >

<cc_config>
<options>
<use_all_gpus>1</use_all_gpus>
<coproc>
<type>miner_asic</type>
<count>1</count>
</coproc>
</options>
</cc_config

Why won't it work???????

#86 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 12:27 pm
by scole of TSBT
If the last line in the cc_config.xml looks like this...
</cc_config

change it to this...
</cc_config>

Are the devices all connected the same way they were before? Same ports, etc?

#87 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 12:35 pm
by robmacagain
The whole shebang has been re done, i can't remember where they were before.

cc_config is this now

<cc_config>
<options>
<coproc>
<type>miner_asic</type>
<count>1</count>
</coproc>
</options>
</cc_config>

the greater than was missing, but it still says
Notice from BOINC
Missing start tag in cc_config.xml

I don't suppose you wanna jump on again and look at my cc and app for me, when you have the time pretty please :)

#88 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 1:07 pm
by scole of TSBT
start up showmypc and pm the code

#89 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 1:52 pm
by robmacagain
Where you gone?

Was showing you the error code and it went off!

its doing some sgminer jobs now but no 20ghs tasks still showing > Notice from BOINC
Missing start tag in cc_config.xml

#90 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 1:57 pm
by robmacagain
Well i could get a couple of ton if i flog a R2 and 2 x R1's, i am well pissed!!!

#91 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 2:46 pm
by Alez
Rob I am confused as to what all you are using , the first cc_config you posted is a monster and not needed.

Post me the contents of your cc_config file located in ProgramData/Boinc and post the contents of the app_config in ProgramData/Boinc/Projects/www.bitcoinutopia.net_bitcoinutopia

which version of boinc are you running ? and post me the link to your computer on BU so I can check the stderr for errors

edit; it's ok, got your boinc version and computers. No units reported yet for me to check.

#92 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 3:34 pm
by scole of TSBT
I've connected remote and his cc_config.xml is fine. It's nice and small now. In stdout, it just says no tasks available. I think that can still mean boinc client doesn't recognize the existence of the ASICs. Drivers look good though, I stumped. On;y think I can think of is shutdown boinc client, rename boinc folder to boinc_old and re-install boinc.

#93 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 3:42 pm
by robmacagain
Ok i am back, had get kid from school he is only 5.

Cheers for having a peek.

What i have is an error message of : Notice from BOINC
Missing start tag in cc_config.xml
16/10/2014 15:23:44 · more...

app_config is
<app_config>
<app>
<name>C-cgminer</name>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<plan_class>asic</plan_class>
<app_name>C-cgminer</app_name>
<cmdline>--anu-freq 250</cmdline>
</app_version>
</app_config>

cc_config is now

<cc_config>
<options>
<coproc>
<type>miner_asic</type>
<count>1</count>
</coproc>
</options>
</cc_config>

it will not start any 20 ghs units, everything seems ok, Scole can't see anything and im on the verge of going down the nut house, spent all last night farking with it.

May have ask REB for help.

#94 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 4:36 pm
by scole of TSBT
Sometimes there's a bad character in the file that doesn't even display in the editor or even odd end of line delimters. I know this will be a PITA, but rename cc_config.xml to something else and use notepad to type out a brand new one, save and start boinc.

#95 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 5:15 pm
by Alez
After you have made a brand new cc_config.xml in the boinc folder, rename the app_config.xml to oldapp_config.xml as other than overclocking it's not needed. Let's get it working first then bother about that. Next , as it's a new install of boinc manager check tools > computer management > processor usage and ensure whilst computer is in use is checked and use GPU is checked. Shutdown Boinc and restart. Check the output in advanced > event log and post it up here. If BU starts working then check which slot it is running in , go to that slot and check the output of the Stderr.txt. Failing that uplug all the miners, open ziadag and plug each one in individually and check that they are recognised. For the R-boxes, pull the power and leave for 10 secs or so before replugging. Sometimes just pulling the usb out is not enough to reset them. If you are having issues with any of this not being clear them pm your phone number and I can give you a call and see if we can figure it out.

#96 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 7:36 pm
by robmacagain
Can you do me a
1. app_config for the rbox
2. what is wrong with the......... (Notice from BOINC
Missing start tag in cc_config.xml) cc config.

I am getting close to packing it in here its well frustrating especially when it was working and only by accident did i mess windows 7 up.

#97 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 7:50 pm
by scole of TSBT
Everything one the web about that message indicates it either can't read the file or parse it properly.
I'll take another look and see if I can eliminate possibility of file format issue. pm the code.

#98 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 9:20 pm
by Alez
Use this as your app_config. Allows campaigns 3,4 and 6

<app_config>
<app>
<name>C-cgminer-rbox</name>
</app>
<app_version>
<app_name>C-cgminer-rbox</app_name>
<plan_class>miner_asic</plan_class>
</app_version>
<app>
<name>cgminer-rbox_4</name>
</app>
<app_version>
<app_name>cgminer-rbox_4</app_name>
<plan_class>miner_asic</plan_class>
</app_version>
<app>
<name>cgminer-rbox_6</name>
</app>
<app_version>
<app_name>cgminer-rbox_6</app_name>
<plan_class>miner_asic</plan_class>
</app_version>
</app_config>

with this cc_config

<cc_config>
<options>
<coproc>
<type>miner_asic</type>
<count>1</count>
</coproc>
</options>
</cc_config>


If you want to run 1 app per R box then let me know how many boxes ( 2 I think ) and I post another set to allow that. In fact for 2 boxes

<cc_config>
<options>
<coproc>
<type>miner_asic</type>
<count>2</count>
</coproc>
</options>
</cc_config>


<app_config>
<app>
<name>C-cgminer-rbox</name>
</app>
<app_version>
<app_name>C-cgminer-rbox</app_name>
<plan_class>miner_asic</plan_class>
<cmdline>--usb :1</cmdline>
</app_version>
<app>
<name>cgminer-rbox_4</name>
</app>
<app_version>
<app_name>cgminer-rbox_4</app_name>
<plan_class>miner_asic</plan_class>
<cmdline>--usb :1</cmdline>
</app_version>
<app>
<name>cgminer-rbox_6</name>
</app>
<app_version>
<app_name>cgminer-rbox_6</app_name>
<plan_class>miner_asic</plan_class>
<cmdline>--usb :1</cmdline>
</app_version>
</app_config>

#99 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 9:49 pm
by robmacagain
I'm getting peed off with me never mind you lot.

Ok scole has boinc now recognising BU and its not saying start tags missing BUT I have 3 rboxes sat doing NOTHING, I have a 110ghs one and 2 35ghs ones, zadig has been done windows says that their there but there doing sod all, i have changed ports the lot, what can i do now.

Sorry about all this, it was perfect yesterday before i messed it all up and i didn't even do much it all just worked.

#100 Re: Using ASICS miners etc on Bitcoin

Posted: Thu Oct 16, 2014 10:02 pm
by Alez
Is a unit running ? if so highlight it, select properties, look what slot it is. Go to /ProgramData/Boinc/slots/ the slot open the stderr.txt file, copy the contents and paste it here.
If it's not running then power down the boxes and power only one back up and see what happens.
You do have use GPU selected in computer preferences ?